Stainless Steel Coil & Sheet
0.30 – 6.00 mm · 1000 / 1219 / 1500 mm · 2B / BA / No.4 / HL / No.8
Cold-rolled stainless steel coil and sheet in 304 / 304L / 316 / 316L / 430, from 0.30 mm to 6.00 mm thick and supplied in 1000 / 1219 / 1500 mm widths. Slitting, cut-to-length, film lamination and surface finishing are available, and every shipment is supplied with an EN 10204 3.1 mill test certificate.
STANDARD
ASTM A240 · EN 10088-2 · JIS G4305
THICKNESS
0.30 – 6.00 mm
WIDTH
1000 / 1219 / 1500 mm
GRADES
304 · 304L · 316 · 316L · 430
Specifications
Cold-rolled coil and sheet slit and cut to length in our own Wenzhou facility — the same material stream that feeds our tube lines.
| Parameter | Specification |
|---|---|
| Standard | ASTM A240 / EN 10088-2 / JIS G4305 |
| Grades | 304 (S30400 / 1.4301) · 304L (S30403 / 1.4307) · 316 (S31600 / 1.4401) · 316L (S31603 / 1.4404) · 430 (S43000 / 1.4016) |
| Thickness | 0.30 mm – 6.00 mm |
| Width | 1000 / 1219 / 1500 mm |
| Standard widths | 1000 / 1219 / 1500 mm |
| Coil inside diameter | 508 mm or 610 mm |
| Coil weight | 5 – 25 tonnes |
| Surface finish | 2B · BA · No.4 · HL · No.8 (mirror) |
| Surface treatment | Hairline · vibration · etching · anti-fingerprint · matte · PVC film |
| Delivery condition | Soft (M) / Hard (Y) / Semi-hard (Y2) |
| Mill certificate | EN 10204 3.1 MTC |
| Additional certification | PED / NACE MR0175 |
| Processing | Slitting / cut-to-length / film lamination / surface finishing |
| Applications | Pressure vessels, chemical equipment, architectural cladding, food machinery, desalination |
MTC
EN 10204 3.1 mill test certificate with every shipment
Chemical composition and mechanical properties are reported with measured values, with full heat-number traceability back to the original coil certificate.
Frequently Asked Questions
Which stainless grades do you supply?
304 / 304L for general service, 316 / 316L for marine and chemical duty, and 430 ferritic for food-contact and decorative work. Full mill test certificate with heat-number traceability.
Which surface finishes are available?
2B (matt cold-rolled), BA (bright annealed), No.4 (brushed), HL (hairline) and No.8 (mirror). Protective film can be applied before slitting.
What thickness and width do you process?
0.30 – 6.00 mm thickness in 1000 / 1219 / 1500 mm widths, slit to your ordered width and cut to length at our Wenzhou facility.
Can you split a coil to a custom width?
Yes. We slit to your ordered width and supply slit coil or cut-to-length sheet, with the mill certificate matched to the widths you receive.
Is this the same material your own tubes are made from?
Yes — the coil we ship comes from the same grade and heat-number stream our own tube lines consume, so finish standard and traceability are held to the same specification.
Request a Quote
A formal quotation lands in your inbox within 12 working hours.
- Quotation with dimension table and material certificates
- MOQ, lead time, packing and Incoterms 2020
- Free samples of standard sizes (courier collect)
- EN 10204 3.1 MTC with every shipment